How to Control Devices Connected to your Wi-Fi Infographic: Block and Unblock a Device

We all hate when several devices are consuming the internet without our control. However, we can solve this by following the actionable steps on how to control devices connected to your WiFi infographic below. You will be able to block or unblock any unknown or unwanted devices that are connected to your Wi-Fi connection. How do I block or unblock my device from WiFi?

There are two ways in which you can block or unblock a device from a WiFi network. You can either manually block an approved device or have the router automatically detect and then authorize devices on its own.

For example, if your neighbor has access to your WiFi connection, then all of their devices will be authorized on your network until they disconnect themselves. For this reason, it’s always important to keep track of which devices have been approved or denied access to your Wi-Fi connection.

There are many reasons your device might be unblocked, but the most common is when it has been detected and then authorized by the router.

For example, if you’ve given your neighbor access to your WiFi connection, then all of their devices will be authorized on your network. Unblocking a device can happen before or after it has been blocked. 

How to Control Devices Connected to your WiFi: Block and Unblock a Device

As we seek the best connection, you may find that some devices are hogging your internet. These devices may have been connected legally or illegally to your network.

In the infographic, we have described how to control the devices connected to your Wi-Fi connection. This will happen by blocking and unblocking devices from your Wi-Fi. The following are the steps that you can follow to remove an unknown device from your Wi-Fi connection and how to unblock some other devices:

Why a device is blocked

Devices can be blocked from accessing WiFi networks when they have been detected as unauthorized, usually because they have not been manually connected to the router. These devices are blocked from the network in an effort to prevent them from accessing the network and using the internet without permission.

There are many reasons your device might be unblocked, but the most common is when it has been detected and then authorized by the router.

For example, if you’ve given your neighbor access to your WiFi connection, then all of their devices will be authorized on your network. Unblocking a device can happen before or after it has been blocked.

We all want our devices to get the best connection. That is why we are investing in the best DOCSIS 3.1 modem or DOCSIS 3.0 modem together with the best router for our home or office. In other homes, most people also are investing in the best mesh systems or the best Wi-Fi extender to ensure that the whole home or devices are covered with high-speed internet.

How to block or unblock devices connected to your Wi-Fi network

Unblocking a device is necessary when the WiFi network is password-protected. Devices can be blocked from accessing WiFi networks when they have been detected as unauthorized, usually because they have not been manually connected to the router.

On your browser open your router login page

To block or unblock You can do this by logging into your router’s graphical user interface on your computer. To do this, ensure that you connect the computer to your Wi-Fi network. After opening your browser, enter your router’s IP address.

The default IP address is 192.168.1.1 for most routers or modem router combos. However, you can check your default IP address from the router’s details or manufacturer’s page. For example, the login details for Arris routers can have 192.168.1.254 (in 14% of Arris routers) and 192.168.100.1 (14%) as the IP address for some routers.

Once you put in the IP address on the URL bar, it will take you to your router’s login page.

Sign in to your router login page

Using the username and password provided on the sticker on your router, login into the router’s login page. The default username is “admin” and the password is “password” for most routers. Confirm if you changed the default login username and password when you set up the router.

After logging into the router admin page, you can change the settings, configuration, and connection management.

Access the router’s advanced settings

Once you log in to the administrator settings panel of the router, navigate to the router’s advanced settings. On the advanced settings, then select security followed by access control. This will give an option for all the connected devices to your network.

Allow or block the devices on your network

Once you get to the access control area of the administrator settings panel, you can check and block or unblock any device from your network. Here you can be able to easily control the devices connected to your network from time to time.

After you have blocked the unwanted devices or unblocked the devices that are available in your network, you can set up Guest Wi-Fi on your network to ensure that visitors are not connected to the primary Wi-Fi network.

How do I kick someone off my WiFi without changing the password?

We all know that changing the password is one of the easiest and effective ways to manage your internet connection users. However, it may not always be the solution.

You may want to remove devices and still retain the password because changing the password in every device is tasking. In addition, the intruder may hack back into your network or obtain the other password!

Therefore, you can employ the following ways to manage users on your connection without changing the password:

1. Using Wireless MAC Address filter to kick someone off my WiFi without changing the password

Wireless networks are a great way to share your internet connection with multiple devices at once, but they can be troublesome if you don’t know how to manage them.

Many people have trouble managing their home wireless network because it’s too difficult or time-consuming. They either forget to add new users or give the same password to everyone.

These mistakes leave their network vulnerable and open to intruders. This is a security risk, as you are allowing people to use your internet connection for free and they have no accountability.

There is a simple solution that will make managing your Wi-Fi easier than ever before! With MAC Address filtering, you can block unauthorized access by restricting access based on the device’s unique MAC address number (a 12 digit string of letters and numbers).

You only need this number when adding each device in order for its access rights to be changed automatically without having to change any passwords manually every time someone new wants on your network.

Setting Wireless MAC Address filter

If you’re looking for an easy way out of all the hassle that comes with sharing a wireless router, then you need to change the wireless MAC address settings using the following steps:

  • The first step is to use your router’s admin username and password to login into the control panel. If you have not changed the admin login details, they will be typed at the back of your router.
  • Then proceed to the Wireless or WLAN section on your router’s admin control panel dashboard.
  • Under this section, you should be able to see MAC filtering.
  • Then, if the MAC filtering is ‘Disabled’, change it to ‘Enabled’ like in the photo of the Linksys control panel below:
Using Wireless MAC Address filter to kick someone off my WiFi without changing the password
  • After enabling the MAC filtering, you can then add devices to your MAC address list as shown above. Under this section, you can decide if you want to block or unblock a device from your network.
  • This is because some routers will give you the ability to select or unselect connected devices that you want filtered by your MAC filtering. You can use the IP address to easily identify the devices on your network as shown below:
Using Wireless MAC Address filter to kick someone off my WiFi without changing the password: Using the IP address to limit devices connected to your router

2. Direct Blacklist of devices from your network

You want to restrict access to your WiFi network for the following reasons.

There are a lot of people who have been banned from using your WiFi and you don’t want them coming back, or maybe it’s some family members that you really need to keep away but they know the password. Whatever the case may be, there are many compelling reasons why you would want to block someone from accessing your Wi-Fi network.

The Direct Blacklist is an easy way for users to add devices directly into their router blacklist without changing any settings or even having direct access (via browser) to their router’s web interface. Simply click the “Add Device To Blacklist” button under each device and that device will now be blocked from accessing your wireless network.

Adding their devices to a Blacklist on your router is one of the best solutions as it doesn’t require changing any passwords or installing any software on their computers/devices. All you need is administrative rights and 2 minutes of time.

There are many routers that allow users to add devices to the block list without changing passwords or installing anything on a computer/device (for example D-Link, TP-Link, Netgear, etc). This method does not work for all routers, unfortunately.

3. Using VPN services to remove/ block unwanted devices from your network

If you don’t feel like either using the MAC filtering or blacklist, you can go for a VPN service. If you use some VPN service like NordVPN (I do) or Express VPN among others, then this will work with almost any router! It even works with iPhones and Androids phones too which makes it great for parents who would like to

A NordVPN router or ExpressVPN router will give you the privacy that you need. You can be sure that it is easy to use and is very effective.

4. Using Mobile Applications to kick someone off my WiFi without changing the password

In addition to the three above, you can employ a mobile app to block and unblock Devices Connected to Wi-Fi. There are several mobile applications that can help you manage the connections. In our case, we recommend getting Fing.

Fing will work with both Android and iOS devices to help you manage your connections. It will enable you to:

  • Scan their WiFi network for unauthorized devices
  • Blacklist these devices and prevent them from accessing the internet via your router.
  • To find out what is connected to your WiFi network, including the device’s name/manufacturer and its MAC address. You can check IP address, MAC address and vendor name of a device in real time
  • Block or unblock any device on your network at any time. And to create a list of devices you want to block
  • To block and unblock devices remotely
  • Block or allow any device from connecting to the WIFI network through a simple interface, with no complicated codes.
  • Locate your device by using the “Where is my phone?” feature. You can also set up an alert when the location changes.
  • Get security alerts of intruders and other connections either on email or to the phone

How to unblock before it has been blocked

When you first set up your router, it is possible to make it so that devices have to be manually identified and connected before they can access the WiFi. This will block any unauthorized devices from connecting to the network.

If you are attempting to unblock a device before it has been blocked, then you will need to connect your device manually to the network. To do this, press on your WiFi icon and select the network name (SSID) of your home network.

You should see a list of available networks – select yours and enter the security key or password when prompted. Your device will now be connected to your home Wi-Fi and become authorized on that network automatically.

How to unblock after it has been blocked

The first step to unblock a device is to identify which one it is. If your network has no password, then you can easily see which devices are connected with the router.

However, if you have a password on your WiFi connection, you will need to find out which devices are not authorized so you know which one needs to be unblocked. The easiest way to do this is by logging in and checking your account settings online.

To unblock a device after it has been blocked, you first need to locate the device that needs unblocking and make sure it has a connection. If the device does not have a connection, you will need to reconnect it by following these steps:

-Go into network settings and select “forget” or “forgotten”

-If the connection is still active on the WiFi network, search for the access point again

-Enter password details if necessary

How to unblock device from WiFi Netgear router

How to block or unblock devices from Netgear router: Netgear Orbi system

It is necessary to unblock a device from WiFi Netgear router in order to connect it to the network. One can unblock the device either before or after it has been blocked. Here are some tips for how to do so.

Thus, if you want to unblock a device from your WiFi Netgear, go to the router management page and find the device that is being blocked. Then press the button for “Unblock.” This will allow your WiFi network to detect the new devices.

How to unblock device from wifi pldt

1. Check if the device is unblocked by its IP address

In order to check if the device has been detected and then authorized by the router, open a browser window in your computer and type in 192.168.0.1 in the URL bar (on Windows) or 192.168.0.254 (on Mac). This will take you to your router’s login page, where you can log in with your username and password.

2. If it has not been detected yet, unblock it

If the device has not been detected yet on your network because it was never connected, try manually connecting it to your wireless router first before accessing your wireless network again with this newly registered device.

You may have to enter a WEP key for older models of routers and change some settings like channel width and encryption mode to allow manual connection before you can use this device on your WiFi network again.

How to unblock device from WiFi Huawei P10

When a device is blocked from accessing WiFi, you will either not be able to find the network or it will show that it is unavailable.

To unblock a device from WiFi, you can press the Settings button on your Huawei P10 and then go to Network Connections > Wi-Fi on the screen.

From there, select your network and choose the Forget option under WiFi connections. Now this device will have been unblocked and should be able to access your WiFi network.

How to block a device from WiFi DLink

One way to unblock a device from WiFi is to switch on the router’s MAC filtering. It is possible that the MAC address of your device is not on the list of devices allowed to access the WiFi network.

To do this, press System at the top left of the page, click Wireless Settings, and then select Enable MAC Filter.

This will add a list of authorized devices with their corresponding MAC addresses. You can also manually input MAC addresses by clicking Add New Device button at the bottom of the page. After you’ve added these devices’ MAC addresses, click Save Settings.

How to block a device from WiFi TP-Link

WiFi networks can be password-protected. Devices can be blocked from accessing WiFi networks when they have been detected as unauthorized, usually because they have not been manually connected to the router. You can unblock a device on TP-Link routers by following these steps:

1) Connect to the TP-Link router by typing in 192.168.0.1 into your web browser’s URL bar and clicking “Aceptar”

2) Type in your username and password

3) Go to “Advanced” > “Device List”

4) Click on “Configure Blocking Policy” > “Select Allowed Device” > click on the red, left arrow button next to the device you want to unblock

5) Click on the green, right arrow button next to the same device and then click on “Save Changes.”

How to block WiFi users on Android

The easiest way to see who your WiFi is connected to is by opening the settings on your phone. Click on Wi-Fi, click on the three dots beside the current network you’re connected to, and then click on Advanced.

Scroll down until you see “Show WPS Push Button” and tap that. After that, tap Add Network and type in a name of your network. When you type in the name of your WiFi, it will display all devices currently connected to it.

To add a new user to your network, scroll down until you find “WPS PBC” or “WPS PIN.” Next, enter the device’s MAC address (which can be found in most WiFi settings). Then tap Save.

Otherwise, on Android devices, you can block a user by going to Settings > Wireless & networks > Wi-Fi > Select the WiFi network you want to edit > Touch the menu button in the upper right corner of the screen and select Advanced options > Touch Manage users > The “Add user” option is your best bet. You can also remove existing users.

How to unblock yourself from someone’s WiFi Android

The simplest way to unblock yourself from someone else’s WiFi is to change your network name (SSID) and password.

This is a great option for people with simple router setups, as it requires no knowledge of how the router works.

Here’s how to do it:

1) Open your Android’s Settings page

2) Find the Network setting, and then select Edit Network Profile under the “Associated Networks” section.

3) Select a new SSID, and then enter a new password in the fields provided. Don’t forget to click OK at the bottom of the page.

Your device will now be able to connect to that WiFi network with your new credentials.

Why should you control the devices connected to your Wi-Fi

There are several reasons why you should control the devices connected to your Wi-Fi network. The main ones are as follows:

Get better connection for your devices

Most of the routers available in the market today have a certain number of devices that can access the internet simultaneously from your router. This makes it important to block and unblock devices connected to your Wi-Fi depending on the user.

You don’t want your neighbor’s devices to be the ones using your internet while you can’t enjoy your online activities like gaming or 4K streaming.

In addition, there is a limit on the maximum bandwidth of your router. This means the more the number of devices the less the bandwidth you will have for your devices. This will mean experiencing lags in some activities such as gaming or 4K streaming.

Safety and security of your network

Sometimes you may get an unwanted or unknown device connected to your network. The devices may pose a security threat to your network. This is because they can access records such as banking details or private information from your network causing security threats.

Therefore, it is important to block or unblock unknown or unwanted devices connected to your network.

What is a WiFi password?

A WiFi password is a type of password that protects your WiFi network from unauthorized devices. There are many reasons your device might be blocked from your Wi-Fi network, one of the most common being that it has not been manually connected to the router.

When you purchase a new router, you will usually be asked to enter the username and password for the network. If you want other people to access your WiFi connection, then it’s important to consider setting up a password for the connection.

Conclusion

Since we all want the best internet connection for our devices, it is good to block and unblock any unwanted devices connected to your Wi-Fi network. This means you have to follow the infographic to learn how to control the devices connected to your Wi-Fi network.

After following the steps above, you will be able to enjoy gaming on your gaming console, streaming on your streaming device, while your devices indoors or outdoors will enjoy fast internet.

FAQs

Q: What is blocking a device?

A: Blocking a device from WiFi is when the router detects the device as unauthorized and will not allow it to connect. The router may decide that the device is unauthorized when it has not been manually connected with the router.

Q: When should I unblock my device?

A: Unblocking your device before it has been blocked is ideal. However, at any point, after it has been blocked you can go back in and unblock it.

Q: How do I know if my device has been blocked from WiFi?

A: You can check to see if your device is on a network by going to the WiFi settings on your phone or laptop. You can also check for a notification on your phone that says ‘WiFi unavailable’.

When should I unblock my device?

Your device may need to be unblocked when it has been detected and then authorized by the router. The router may automatically detect when an unauthorized device is trying to connect with the network and automatically approve that device once it determines whether or not that person is qualified for access (i.e., someone who lives in the home).